Home / Intellectual Property

Intellectual Property

Technologies from the AMPIC Lab that are available for licensing through the University of Delaware.

Technology licensing

Heater technologies for dense, low-power photonics

Two inventions from the AMPIC Lab, now listed on UD's Tradespace marketplace. Both remove the long-standing conflict between optical loss and thermal efficiency in integrated photonic circuits.

What we are seeking

  • 01
    Licensing opportunitiesCompanies who want to bring these heaters into products
  • 02
    Strategic partnershipsJoint development with foundries and photonics teams
  • 03
    Industry feedbackInput on requirements, process and performance targets

Metal-Free Doped Silicon Thermo-Optic Heaters for High-Density Photonics

A doped silicon architecture that breaks the historical trade-off between optical loss and thermal efficiency in silicon nitride photonic circuits. Replacing restrictive metal elements with a self-isolating, close-proximity semiconductor heating network gives biopharma, computing and communications developers a low-power, high-density tuning platform that cuts thermal crosstalk and operating energy.

The challenge

Modern integrated photonics relies heavily on silicon nitride (SiN) waveguides for their broad transparency window and low propagation loss, which makes dynamic control of light essential for signal routing and phase modulation. Thermo-optic phase shifters achieve this by applying localized heat to change the waveguide's refractive index, but conventional metal heaters suffer from a severe trade-off. Placing a metal heater close to the waveguide maximizes thermal transfer but adds optical absorption loss that degrades the signal. Moving it farther away lowers thermal coupling and demands unsustainable electrical power, while poor thermal isolation lets heat leak into the substrate, inflating power consumption and causing destructive thermal crosstalk.

The UD approach

University of Delaware researchers developed a thermo-optic heater architecture that resolves this trade-off with a completely metal-free heater optimized for SiN photonic waveguides. Electrically driven doped silicon acts as the resistive heating element, placed in ultra-close proximity to the waveguide to remove metallic absorption while maximizing thermal transfer. A defining feature is the engineered, thermally isolating undercut structure beneath the active area, which confines heat to the device footprint and prevents it from dissipating into the surrounding substrate. Together, close-proximity silicon heating and precise thermal isolation enable efficient, localized, low-power thermo-optic phase shifting across dense photonic circuits.

Key benefits

  1. 1Zero metallic optical loss

    Doped silicon replaces metal components, allowing ultra-close heater placement without signal-degrading optical absorption.

  2. 2Superior thermal isolation

    Engineered undercut structures trap and confine heat within the active device zone, blocking wasteful dissipation into the chip substrate.

  3. 3Low-power phase shifting

    Maximized local thermal coupling delivers efficient thermo-optic tuning at a fraction of the electrical power of conventional heaters.

  4. 4Flexible layout design

    Multiple heater configurations let optical designers tune the thermal distribution to their architecture limits.

Integrated Doped Resistive Heater for Controlling Volatile Phase-Change Material

A side-contact heating architecture that removes the conflict between optical performance and thermal efficiency when manipulating volatile phase-change materials. With precise, nanosecond-scale local thermal control through standard CMOS workflows, it gives hardware developers a low-power, high-density platform for next-generation optical networks and AI chips.

The challenge

Next-generation integrated photonics relies heavily on phase-change materials (PCMs) for reconfigurable devices in neuromorphic computing, optical memory and advanced telecommunications. Unlike non-volatile PCMs, which permanently keep their state, volatile PCMs reset automatically when the stimulus is removed. That makes them valuable for high-speed applications, but they need continuous, highly precise thermal stimulation to hold their active phase. Existing approaches such as focused laser pulses, direct current injection and global substrate heaters are poorly suited to this, suffering from energy inefficiency, material delamination and severe thermal stress. Traditional top-contact heaters also sit inside the optical path, causing significant insertion loss and complicating standard silicon fabrication.

The UD approach

University of Delaware researchers developed an integrated resistive heater architecture engineered specifically to control volatile PCMs in silicon photonic systems without obstructing light propagation. Heavily doped silicon rib regions sit laterally beside the silicon waveguide core and act as localized, high-precision Joule heaters. When a voltage is applied, the lateral ribs raise the temperature of the volatile PCM layer above its phase-transition threshold through tailored geometric thermal gradients. Moving the heater to the side of the waveguide preserves optical mode integrity and minimizes absorption, while tight thermal confinement delivers rapid, nanosecond-scale heating and cooling and blocks thermal crosstalk, enabling dense and reliable component packaging.

Key benefits

  1. 1Preserved signal integrity

    Lateral positioning keeps the heater out of the optical path, preventing unwanted absorption and insertion loss.

  2. 2Ultra-low power and high density

    Joule heating is confined to the target zone, reducing power consumption and preventing thermal crosstalk between adjacent components.

  3. 3Nanosecond-scale switching

    Concentrated heating and rapid thermal cooling enable high-speed, fully reversible phase transitions.

  4. 4CMOS-compatible fabrication

    Everyday doped silicon structures integrate into standard silicon photonics foundry workflows, avoiding extra manufacturing complexity.

  5. 5Enhanced device lifespan

    Avoiding direct current injection and bulk thermal shocks protects the phase-change material from structural degradation and mechanical stress.

Interested in licensing?

  1. 1ReviewRead the technology brief or the Tradespace listing.
  2. 2Reach outContact UD Technology Transfer and mention the UD reference number.
  3. 3DiscussTalk through fit, terms and any joint development with the lab.

techtransfer@udel.edu 302-831-4005