This page has some software utilities on it. duuh. E-mail ( z28tpi406t56conv@hotmail.com or dzug@eecis.udel.edu ) with comments.
Injector re-sizing utility. This one lets you put in an injector size and pressure for rated sizing, then NEW pressure to be used. It kicks out the NEW Lb/Hr rating.
DZ-INJ.zip click and SAVE it to your disk. Like I said.. no warranty, no tech support, but I'm always glad to help those who can help themselves ;-P
Compression Ratio Calculator. Improved to consider that the area of the Gasket opening has a larger diameter than the cyllinder bore.
CRCALC.zip click and SAVE it to your disk. Like I said.. no warranty, no tech support, but I'm always glad to help those who can help themselves ;-P
Note:
I have another version of this utility that takes into consideration the air gap between the cyllinder wall and the wall of the piston that is ABOVE the
top ring. You need to know the distance that the top ring is down the piston, and the distance between the piston and the cyllinder wall up at the top of the piston (when it is centered).
This will DROP your compression ratio.
If you want this version, you'll have to email me and ask for it, I'll send it out, its free, I just want an idea of who's hangin around here.. these hits come from somewhere don't they? ;-P
Try z28tpi406t56conv@hotmail.com or dzug@eecis.udel.edu.
CFM-Calc, a simple excel sheet to calculate airflow thru a given size throttlebody.
cfm-calc.xls right-click and SAVE it to your disk. If you click on it it is likely excel will load and read in the file and you'll have to save it locally... your choice.
Hit Counter: 