
***********UNTESTED !!!!!********************
*
*   USE AT YOUR OWN RISK !!!!
*
*********************************************

Vout from DIY-EFI WB kit should be connected
to Pin D8 (TPS2, A/D channel 0) on the
1227165 ECM.  

The WB AFR is displayed in the "Commanded AFR"
field of the ALDL stream, so it should be
able to be read by AND scan tool/package.  The
Voltage-to-AFR lookup table was calibrated to
the published table to within +/- 0.5%.

Last Updated 03-Feb-05